I have some problem in loop checking. If I want check the loop by Modem then it’s ok.
But, I want check the loop by router of serial port. then how can do this….
I get the error “The print processor is unknown” when installing a printer.
A. There are 2 causes for this.
Solution to Problem I
1. The default print processor winprint.dll is missing from the directory
%systemroot%\system32\Spool\Prtprocs\W32×86
2.The Winprint key in the registry is missing or corrupt
If the winprint.dll is not found you should expand
Winprint.dl_ from your Windows NT installation CD using the
EXPAND command
If the file is there then you need to check the registry
1. Start the registry editor (regedit.exe)
2. Move to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
Control\Print\Environments\Windows NT x86\Print Processors
3.If the winprint key exists goto step 4. If it does not exist from the Edit menu,
select New -Key, and enter a name of winprint
4. Under winprint check for a value called Driver. If this does not exist from the
edit menu, select New – String Value and enter a name of Driver.
5. Driver should have a value of winprint.dll. If it does not, double click on driver and
set to winprint.dll. Click OK
6. Close the registry editor
7. You should now restart the computer
Hi sir,
I have some problem in loop checking. If I want check the loop by Modem then it’s ok.
But, I want check the loop by router of serial port. then how can do this….
Please reply me any body I very thank full.
abhi.adte@gmail.com
Hi Abhinay,
First no sir!
k
and its very simple google for AT commands available on cisco routers you can check the status of routers with AT commands
Check this book at google http://books.google.com/books?id=n8o2C1sC7dYC&pg=PA147&lpg=PA147&dq=%22at+commands%22+cisco&source=web&ots=Mk7gzyTq9t&sig=2LX2-WIf6Jm4Ab2pDuHy7FPqimI
“Print Processor Is Unknown” this is error on my system when i try to connect the printer…please give me solution…
I get the error “The print processor is unknown” when installing a printer.
A. There are 2 causes for this.
Solution to Problem I
1. The default print processor winprint.dll is missing from the directory
%systemroot%\system32\Spool\Prtprocs\W32×86
2.The Winprint key in the registry is missing or corrupt
If the winprint.dll is not found you should expand
Winprint.dl_ from your Windows NT installation CD using the
EXPAND command
expand -r :\i386\winprint.dl_ %systemroot%\system32\spool\
prtprocs\w32×86
Solution to Problem II
If the file is there then you need to check the registry
1. Start the registry editor (regedit.exe)
2. Move to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
Control\Print\Environments\Windows NT x86\Print Processors
3.If the winprint key exists goto step 4. If it does not exist from the Edit menu,
select New -Key, and enter a name of winprint
4. Under winprint check for a value called Driver. If this does not exist from the
edit menu, select New – String Value and enter a name of Driver.
5. Driver should have a value of winprint.dll. If it does not, double click on driver and
set to winprint.dll. Click OK
6. Close the registry editor
7. You should now restart the computer
Hi friend,
Please can you give me some information about conversition about the RIP v.2 to OSPF.
Redistribution of RIP into OSPF
Hi friends,
I have some problem of linux so any bady plz help regarding to Linux…..
PROBLEM:-
- Booting is direct from DHCP ( MAC) address.
-i WANT DATA THIS IS VERY IMP.
I check it.:-
HDD DETECTION, BOOT SECQANCE
PLEASE HELP ME MY FRIEND….THIS IS VERY URGENT….
hI CISCO NET THANKS OF ALL I GOT PRIVIOUS SOLUTION I’M SO VERY HAPPY…..
tHANK A LOT